Silk Rose Red PLA Filament 1.75mm 3D Printer Filament 1KG 2.2LBS

Additional information


Silk PLA


Silk Rose Red


7.8" – Spool Height: 2.55" – Spool Hub Hole Diameter: 2.08"


2.20 pounds/1kg






ISO9001, CE, ISO14001, STMC, SGS

Product Description

  • Silk PLA Filament
  • Premier Material: made of polylactic acid from U.S..
  • N.W: 1KG
  • Diameter: 1.75±0.05mm
  • Vacuum packing
  • Spool Diameter: 7.8″ – Spool Height: 2.55″ – Spool Hub Hole Diameter: 2.08″


Print Settings and tips:

  1. Printing Temperature: 195-220°C
  2. Hot bed Temperature: 40-60°C
  3. Other Layer Printing Speed: 30-60mm/s,the printing speed of Silk PLA is suggested to be about 30mm / s.
  4. First Layer Printing Speed: 20-25 mm / s.
  5. Retraction:0-5mm
  6. Retraction Speed:<45mm/s
  7. Clean or change the nozzle before printing is good way to reduce jam if it was used for many times.


Possible problems:

  • Some of 3D printer with Bowden Drive Extruder may have clog problems. The reason is that the softening temperature of silk PLA is lower.
  • The solution method is:
  • 1.Turn off Retraction settings.
  • 2.It is necessary to clean up the filaments blocked in the throat before printing for second time.

Support and After-sales:

  • We have been committed to producing high-quality products and providing customers with a good experience. If there is any quality problem, we will definitely solve the problem until you are satisfied.


Ask For CC3D Filament

We will contact you within 1 working day, please leave your useful mail address